Electrician in Claygate
Bring it Ohm Electrical Solutions is a local electrician in Claygate, looking after electrical work in the village and surrounding KT10 streets, from tracing a tripping RCD to rewiring a whole house. Paul, a City & Guilds qualified and NAPIT registered electrician, comes from Weybridge, a short drive away, and explains everything he finds in plain English.
Which electrical services does Paul offer in Claygate?
Paul offers all five of his core services in Claygate, and the links below explain what each one involves, how it is priced and what paperwork you receive.
Electrical fault finding
Breakers that trip, sockets that stop working and faults that come and go.
Electrical fault findingEICRs and electrical testing
Condition reports for homeowners, landlords and buyers in KT10.
EICRs and electrical testingHouse rewiring
Partial and full rewires, planned around your building work.
House rewiringEV charger installation
Home chargers, with your supply and consumer unit checked beforehand.
EV charger installationEveryday electrical work
Sockets, lighting, smoke alarms and outdoor power.
Everyday electrical work
What other jobs do people in Claygate call an electrician for?
Village homes in Claygate often need a mix of repairs and small improvements rather than a full rewire.
Damp-related tripping
Finding moisture in outdoor lights, garden sockets or roof voids that trips the RCD.
Loft conversion circuits
New lighting and sockets for converted lofts, certified under Part P.
Interlinked smoke alarms
Mains-powered smoke, heat and carbon monoxide alarms throughout the house.
Replacing tired accessories
Swapping worn or cracked switches and sockets after checking the circuit.
Extra sockets in older rooms
Adding outlets where rooms were wired for far fewer appliances.
Garden power
Supplies to sheds and garden offices with suitable protection.
What electrical work does Paul carry out in Claygate?
Calls from Claygate homeowners usually concern tripping circuits, older wiring in village houses, loft and kitchen projects, or smoke alarm upgrades.
Tripping after rain or damp weather
Water getting into outdoor lights, garden sockets or roof voids is a common cause of earth leakage, which makes an RCD trip. Fault finding isolates the affected circuit and tests the insulation to find the source.
Older wiring in village houses
Village homes that have been extended over the years can have wiring from several decades on the same circuits. An inspection shows which parts are sound and which need updating before you redecorate.
Loft conversions and kitchens
New rooms need new circuits, and new circuits are notifiable under Part P. Paul plans positions for sockets, lighting and appliances before plastering so the finished rooms need no trunking.
Smoke and heat alarms
Mains-powered interlinked smoke, heat and carbon monoxide alarms give earlier warning throughout the house, and are often fitted as part of a rewire or extension.
What happens if Paul finds a fault during an inspection?
If an inspection uncovers a fault, Paul records it with the correct observation code, explains what it means and what could happen if it were left, and then quotes separately for the repair.
The photo shows a residual current device with heat damage and signs of water getting in, found by Paul during an EICR. Faults like this can sit unnoticed behind a consumer unit cover while everything appears to work normally.
A C1 or C2 code means danger is present or potential, and FI means further investigation is needed; any of the three makes the report unsatisfactory. The EICR page explains each code in more detail.
Who is the electrician looking after Claygate?
Claygate is looked after by Paul Cerri, the qualified electrician who runs Bring it Ohm Electrical Solutions and visits, quotes and oversees every job himself.
Claygate customers get a qualified local electrician who explains the problem honestly, quotes before any planned work starts and does not charge for call-outs or quotes.
Paul's qualifications include a Level 3 NVQ Diploma and a Level 3 Award in inspection and testing, and his NAPIT certificates are listed on the About page.
- Calibrated test equipment on every job
- Written quotes for planned work
- Certificates issued once work is complete and paid for
- 12 month workmanship guarantee on installation work
Are Paul's customers happy with his work?
Yes, Paul is rated 5 stars on Google, and the reviews below come from his customers in Weybridge, Chertsey and across the surrounding area.
“Paul at Bring It Ohm Electrical Solutions is great. He’s friendly, honest, reliable, and takes the time to explain everything clearly, which I really appreciated. It’s refreshing to find someone you can genuinely trust. I wouldn’t use anyone else for electrical work going forward and would highly recommend his business.”
Shyamal Mavani“Paul installed an extended a plug for us inside our kitchen cabinet and the whole experience was great! He arrived on time, was kind, communicative, and completed the work to a high standard. Everything was left tidy and neatly finished, and we’ll be continuing to use his services from here, on out. Thank you Paul!”
Zel A“Great communication, arrived on time, very quick, efficient and clean, will use again”
Anthony Worsell
Is Paul registered and insured to work in Claygate?
Paul holds both installation and inspection qualifications, so the same electrician can test a Claygate home, explain the results and carry out any work needed.
Level 3 NVQ Diploma
Qualified to install electrotechnical systems and equipment.
Level 3 Award
Qualified in initial and periodic inspection and testing.
NAPIT registered
Registered for installation work and Part P self-certification.
Insured
Public liability insurance held for the work undertaken.
Is my Claygate home in a conservation area?
It may be, because Elmbridge Borough Council has designated two conservation areas in Claygate, the Claygate Village and Foley Estate conservation areas, which can affect external alterations.
You can check the boundaries on the council's Claygate conservation areas page. Electrical work inside a house is rarely affected, but fittings on the outside of the building and any work to a listed building may need more care.
Historic England explains that listed building consent is needed for works that affect a listed building's special character, and recommends checking with the planning authority before work begins.
Questions worth answering before work starts
- Is the house in the Claygate Village or Foley Estate area?
- Is the building listed or locally listed?
- Will any fittings be visible from the street?
- Where can cables run with the least disruption?
Elmbridge's planning team can answer the consent questions; Paul can then plan the electrical work around them.
Does Paul cover Claygate?
Yes, Paul covers Claygate village, the Foley Estate and the streets around Claygate station, and works across the rest of KT10, including Esher and Hinchley Wood.
Claygate is a short drive from Weybridge, where Paul is based, so a visit to look at a job is easy to arrange. He does not charge a call-out fee or a fee for quoting.
Enquiries from Long Ditton, Chessington and Surbiton are also welcome. See also our pages for an electrician in Esher and an electrician in Thames Ditton, or our pages for an electrician in Weybridge, where Paul is based, and an electrician in Walton-on-Thames.
Claygate
- Claygate village
- Foley Estate
- Claygate station area
Nearby areas
- Esher
- Hinchley Wood
- Long Ditton
- Thames Ditton
- Oxshott
- Chessington
Claygate electrician FAQs
Is there an electrician who covers Claygate?
Yes, Bring it Ohm Electrical Solutions covers Claygate and the rest of KT10 from Weybridge, a short drive away. Paul is NAPIT registered and oversees every job himself.
Why does my RCD trip when it rains?
An RCD that trips in wet weather usually points to moisture getting into an outdoor light, garden socket, outbuilding supply or roof void. Fault finding isolates each circuit and tests its insulation to find exactly where the leakage is coming from.
Does a loft conversion need new electrical circuits?
Usually yes, because a converted loft needs its own lighting and socket circuits, which are notifiable under Part P of the Building Regulations. Paul plans the layout with you, then tests, certifies and notifies the work through NAPIT.
How long does an EICR take in a Claygate house?
An EICR usually takes between two and four hours for a standard home, depending on the number of circuits, the size of the property and how clearly the consumer unit is labelled. Paul summarises any urgent findings before he leaves.
Do you charge for quotes in Claygate?
No, there is no charge for a quote and no call-out fee. Paul quotes each job individually, because the cost depends on the existing installation and what the work involves.
Do older Claygate houses need rewiring?
Not automatically, because the age of a house does not on its own mean the wiring must be replaced. An EICR shows whether the existing wiring can stay in service, needs partial work or should be replaced.
What should I tell Paul before a fault finding visit?
Tell Paul which breakers or RCDs tripped, what was running at the time and whether any recent building, plumbing or DIY work took place. Knowing whether the fault is random or linked to one appliance helps narrow the search.
Can you fit interlinked smoke alarms?
Yes, Paul installs mains-powered interlinked smoke, heat and carbon monoxide alarms, so an alarm in one room sounds throughout the house. They are often fitted during a rewire, extension or loft conversion.
How do I book an electrician in Claygate?
Call Paul on 07885 694524, send a WhatsApp message or use the quote form at the top of this page to book an electrician in Claygate.
Include your postcode, a description of the problem or project and any symptoms you have noticed. There is no call-out fee and no charge for a quote.