If you own an older house in Addlestone or Hersham with fabric-covered wiring, a fuse board that keeps tripping, or sockets added piecemeal over the decades, a full or partial rewire brings the fixed wiring up to current safety standards. Bring it Ohm Electrical Solutions rewires older homes for homeowners, landlords and businesses across Weybridge and Elmbridge, and Paul Cerri tests and certifies every job to BS 7671. Here is how the work runs, what it costs, and how to book.
Does an older house actually need a full rewire?
Not every older house needs a full rewire, which is why I start with an inspection rather than a quote. The clearest signs that wiring has reached the end of its life are rubber or fabric-covered cables, a cast-iron or old-style fuse box with rewirable fuses, round-pin sockets, no RCD protection, and scorch marks or a burning smell near outlets. Houses wired before the 1970s often fall into this group, and additions made over the years can leave circuits overloaded or mixed in ways that no longer meet British Standards.
The honest way to settle the question is an Electrical Installation Condition Report (EICR). I inspect and test the existing installation, grade any faults, and tell you whether a full rewire, a partial rewire, or targeted repairs is the right call. The NICEIC’s guide to rewiring for homeowners sets out the same decision in plain terms. A partial rewire, replacing a damaged circuit or an old consumer unit, is often enough, and I will say so if that is what the testing shows.
What happens during a rewire?
A rewire runs in two stages, planned so the work moves through the house as quickly and efficiently as possible. The first stage, the first fix, replaces the cabling behind walls and under floors and runs new circuits back to the consumer unit. The second stage, the second fix, fits the new sockets, switches, light fittings and consumer unit, then everything is tested before the power goes back on.
A typical older-home rewire runs over several days to a couple of weeks, depending on the size of the property and how many circuits it needs. Floorboards come up, chases are cut into walls and the power is off for long periods, so you will need to move out while the work is done. I give you a start date and an expected finish date before we begin, so you can arrange somewhere to stay. When the installation is complete I test every circuit, issue an Electrical Installation Certificate, and notify the work to building control under Part P, so you have the paperwork a future sale or a mortgage lender will ask for. You can read more about what a full or partial rewire involves on the dedicated service page.
How much does rewiring an older house cost?
The price of a rewire depends on the number of rooms and circuits, the age of the property, and whether it is a full or partial job, so I quote a fixed price in writing after the survey rather than a number over the phone. As a rough guide, a rewire starts from around £5,000 to £7,000, with the final figure depending on what you want included. Your final quote depends on the layout of the house, how many circuits and electrical points it needs, how easily I can reach the cable routes under floors and inside walls, the fittings you choose, and any other work done at the same time. Because costs vary this much between a two-bedroom flat and a four-bedroom house with outbuildings, the survey is what makes the quote accurate.
The EICR that tells us what the house needs is priced clearly:
| Service | Price |
|---|---|
| EICR (Electrical Installation Condition Report) | From £90 per property (£60 per consumer unit plus £30 per circuit) |
Payment terms and any staged payments for larger rewires are agreed before work starts, so there are no surprises on completion.
Why choose Bring it Ohm for a rewire?
I am Paul Cerri, and I run Bring it Ohm Electrical Solutions as the person who turns up, does the work and signs the certificate. Every rewire is tested and certified to BS 7671, the wiring regulations, and notified under Part P of the building regulations, which is the documentation a buyer, surveyor or lender expects to see. My registration is held with NAPIT, which you can verify before you book.
For older houses in particular, the value is in the diagnosis, not just the labour. I find faults with calibrated test equipment rather than guesswork, so you only pay to replace what genuinely needs replacing. A recent example: I rewired a house in Hersham. The job covered a full strip out of the redundant wiring and old accessories, new cabling for every circuit, new sockets, switches and light fittings throughout, including external lighting and power to the garage, and a new RCBO consumer unit with surge protection.
Which areas do you cover?
I cover Addlestone, Hersham and the wider Weybridge and Elmbridge area for rewiring and electrical work. That includes Walton-on-Thames, Esher, Cobham and the villages around them. If you are in Addlestone or Hersham you can see the local pages for each town or just contact me with your postcode and I will confirm I can reach you.
How do I book?
Booking starts with a conversation about what the house is doing and how old the wiring is. Call 07885 694524 or send the details through the contact page, and I will arrange a visit to inspect the installation, carry out an EICR if needed, and give you a written quote for the work. From there we agree a start date and how long you will need to be out of the house.
Frequently asked questions
Why do you need to move out during a rewire?
You need to move out during a rewire because the power is off for long periods and floorboards, walls and ceilings are opened up throughout the house, which makes it unsafe to live in while the work is under way. I confirm the start date and how long the job will take before we begin, so you can arrange to stay with family, friends or in short let accommodation until the house is ready.
Will the rewire be certified and notified to building control?
Yes. Every rewire is tested and certified to BS 7671, and I issue an Electrical Installation Certificate on completion. The work is also notified under Part P of the building regulations, so you have the records a future sale, survey or lender will ask for.
Do you cover Addlestone and Hersham for rewiring?
Yes, both Addlestone and Hersham are within my area, along with the rest of Weybridge and Elmbridge. If you are nearby but outside those towns, send me your postcode through the contact page and I will confirm.
How much does an EICR cost before a rewire?
An EICR starts at £90 per property, worked out as £60 per consumer unit plus £30 per circuit. It inspects and tests the existing wiring, grades any faults, and tells you whether you need a full rewire, a partial rewire, or smaller repairs, so you are not paying to replace more than the house needs.
Need Your Older House Rewired?
Contact Bring It Ohm in Weybridge to arrange an inspection and a written quote for a full or partial rewire.
